EDIMAX ES-5824PH
Fast Ethernet 24-Port Rack-Mount PoE Web Smart Switch
Konverzný kurz: 1 EUR = 30,1260 SKK
Popis produktu EDIMAX ES-5824PH
Complies with IEEE 802.3/802.3af/802.3u/802.3x/802.1p/802.1q standards
24 Ports 10/100Mb/s +2 Gigabit Combo SFP/UTP PoE Web Smart Ethernet Switch
Supplies 48V/DC with 15.4W output per port (total 195W)
Provides Store-and-Forward architecture
Provides port-based remote power control to restart connected PoE devices individually
Supports Auto-MDI/MDI-X and Auto-Negotiation
Features power consumption UI to optimize the power usage for connected PoE devices
Supports 26 port-based VLAN and 32 tag-based VLAN groups
Supports 2 trunking groups (4 ports per group and up to 2 groups for each device)
ES-5824PH is 24-port 10M/100M With 24-port PSE/PoE Rack-mount PoE Web Smart Fast Ethernet Switch that is designed for medium or large network environment to strengthen its network connection. Including rack-mount brackets, the 19" size fits into your rack environment. It is a superb choice to boost your network with better performance and efficiency.
Complies IEEE 802.3af Power over Ethernet (PoE) ports
The ES-5824PH features 24 IEEE 802.3af Power over Ethernet (PoE) ports which supply the electricity up to 15.4 watts per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over existing LAN cable to supply the power for IEEE 802.3af compliant network accessories. The ES-5824PH also features PoE detection to verify whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be sent through LAN cable. The ES-5824PH can connect with different PoE products such as Access Points, IP cameras or IP phones…It is the best solution where the power outlets are difficult to install or the power outlets are far to the device.
No Special Networking Cable Required
Just use the standard Cat-5 Ethernet cable to link between the ES-5824PH and the powered devices (PE). This Ethernet cable can transmit both data and power. No power wire is needed for the powered devices (PE). It reduces the installation time and cost.
Supports Smart Features
The ES-5824PH Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5824PH also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data and link aggregation to create fat traffic pipelines. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager’s mobility. ES-5824PH also provides IGMP snooping to reduce broadcast traffic from streaming and other bandwidth intensive IP applications.
Supports Auto-MDI/MDI-X
Every port of the ES-5824PH can automatically detect the type of cable. There is no need to choose crossover or parallel cables when you are connecting this switch to another switch or to a computer.
Supports Auto-Negotiation
Every port of the ES-5824PH can automatically distinguish the connected network devices are running at 10Mbps, 100Mbps and Half/Full-Duplex mode. The ES-5824PHE can adjust the speed and mode accordingly.
Supports Non-Blocking wire speed
The ES-5824PH receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port of the ES-5808P has the speed up to 200Mbps in full-duplex mode simultaneously . This feature provides full wire speed to the connected devices and allows you to run a high speed network smoothly.
Supports Store and Forward Architecture
With the store and forward architecture, the ES-5824PH can maximize network performance while minimizing the propagation of bad network packets.